TABLE OF CONTENTS
- External Printer Features
- Internal Printer Features
- Ribbon Cartridge Features
- Display Statuses and Buttons
External Printer Features
Front/Top of Printer
A. Top cover open button
B. Fan
C. Input hopper
D. LED buttons
E. LCD screen
Back of Printer
A. Backside card outlet
B. Output hopper fixing hole
C. Power switch
D. 24V power connector
E. USB port
Internal Printer Features
A. Output hopper - Collects the printed or encoded cards
B. Input hopper - Loads the cards for printing
A maximum 100 cards can be loaded when the cover is closed. A maximum 200 cards can be loaded when the cover is opened.
C. Card thickness control lever - Adjusts to thickness of cards
D. Ribbon cartridge - Holds printer ribbon and cleaning roller
E. Thermal printhead - Enables printing
The thermal printhead is hot after printing. Do not touch its surface with fingers or objects. Doing so could reduce print quality or permanently damage the thermal printhead.
Ribbon Cartridge Features
A. Ribbon cartridge
B. Ribbon
C. Disposable cleaning roller
Display Statuses and Buttons
The CIX900 printer has five statuses: Initializing, System Ready, Printing, Error, and Top Cover Open.
Initializing: The printer is booting up.
System Ready: The printer is ready.
Printing: A print job is in progress.
Error: An error has occurred.
Top Cover Open: The top cover is open.
The LCD display shows printer statuses.
Buttons to the left and right of the display screen perform different functions depending on the status shown.
Status | Left button function | Right button function |
---|---|---|
Initializing | None | None |
System Ready | Ribbon Type/Balance | Sleep |
User Printed Counts | Initialize from sleep | |
Network IP Address | ||
Subnet | ||
Gateway | ||
Network MAC Address | ||
Pull a card out | ||
Printing | None | None |
Error | Retry | Cancel |
Top Cover Open | Move a card backward | Move a card forward |
Cleaning Mode (when both buttons are pushed at the same time) |
Hardware Setup
1. Plug the printer's power cord into a power outlet
2. Plug the printer's USB cord into the computer
The CIX900 should display an "Initializing" Status indicating it is booting up.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article