CIX900: Print Both Sides of ID Card

Modified on Mon, 19 Feb at 12:52 PM

Enable Duplex mode into your CIX900 to ensure ID Cards are being printed in both sides. 


Print Both Sides

1. Go to your Control Panel > Click Devices and Printers Printer Properties > Click Service 

sau»d0Jd 6uaupd unepp se PS Ols-cn  


Ensure Flipper is available under the Printer.


IDP SOLID.510 card Printer Properties P'*ts Advnced Color Manawnent [D merVersion :2229.2 op SOLO card Print printer 8 Prnter O CLX serial sscsooooolrogss version 1.0272 Ribbon Type P-YUCKO Ribbon Balance 116/250) Flipper connected Flipper top Status Card empty sens serial 4321878 version 200.01 Waiting Flipper tray top status Prit Technical Sheet Clean *inter Con fig Printer Upgrade Firmware
 
 
2. Click Advanced > Click Printing Defaults 
 
IDP SOLID.510 card Printer Properties Pctts Advmced ColorManawnent Securiy Sevice @Always available C) Available from Priority: Driver: @Spool print documents so program finishes printing faster O Stat printing after last page is spooled @Start printing immediate"/ O Print directly to the printer Hold mismatched documents Print spooled documents first Keep printed documents Enable advanced printing features Printing Defaults...
 
 
3. Click Printing 


4. Select Both(Top + Bottom)


5. Click Apply > Click OK


IDP SOLID-510 Card Printer Printing Defaults Layott Inwt / Ottwt Lo•d/Save Do Printing Both (TOP • 30ttom) Ribon Save YUCKO pa Area) v Ribon Spu - No v Color Sense Other High Warm Diffusion Other
 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article